A prototype 1x123 power pak for E series heads. The power pak has a SureFire clickie

switch mounted in the tail of the tube as opposed to a removavle tail cap switch. The pak

also has a groove for receiving the SureFire lanyard ring.

The lanayrd ring has not been installed yet as this tube still needs to have holes drilled and

tapped for a pocket clip. The tube will be anodized before final asembly. There are 4 milled

slots in the knurled section which will receive Traser tritium vials after anodizing.

I decided to modify a McLux-PR head for this host:

The body and head were anodized in black hard coat. A BadBoy 500 and Luxeon III were installed.

A domed saphire crystal window was used.

BACK to Page 2