A KL2 head was gutted and one of my new 38 mm reflectors was chopped down to fit in the

head. A custom LED and converter pod was made that mates with the base of the reflector

and uses the original contact spring assembly. The converter is a DownBoy 917. The

LOTC was modified with a McE2S two stage switch and a resistor of 30 ohms which yields

a light output (1 meter) of 240 lux on low whereas the high is 2470 lux. The KL6 (shown

with this mod) measured 2030 lux. It has a very similar beam with a slightly sharper "edge"

to it than the KL6. The angle of the spill beam is larger than the KL6 which would be

expected since the reflector is not as deep.

BACK to Page 2