Aleph 1 prototype is shown below.

This host is designed to host a new reflector based on the Pelican M6 reflector along with a

single lithium 123 cell and a two stage switch. The tail cap is blind tapped for mounting of a

swivel tab as well as through tapped in the guard for 1/4" x20 mounting options. There is

an additional hole in the guard for accepting a lanyard clip. A threaded bezel ring retains

the window, O-ring and reflector.

A new head based on the E-screw module allows for exchange of the LED and driver.

These parts will be anodized to test dimensions as well as provide for test light.

After anodizing and some tritium capsules added to the tail cap:

BACK to Page 2