Made In America: Lighting for "OceanPlanet" 

Interior, low level lighting:


This housing is 1" deep X 2" X 3". There is room for a switch to be mounted on the side
as well as space for electrical connections. I suggest that the Beldon 8442 wire be used for
supply to these fixtures.These fixtures will be mounted on  the cabin ceiling, outboard close to
the hull/ deck joint. This will allow passage down the centerline of the boat without viewing
the LED sources. Direct as well as reflected light should provide ample illumination for simple
tasks and navigation below.

Chart/ Nav Station Light:

        Don's Home